2004年3月7日 · I have a chevy 350 and need to put the distributor in. When looking at it from the the front bumper, does the motor turn clockwise or counterclockwise? What's the best way to …

2004年9月20日 · my bud just bought a Delco Remy GM alternator- part number 7924-3. Hes wanting to put it on his 2F motor, but we're wondering if the direction the alternator spins …

2010年1月29日 · Sounds like you have a reverse rotation fan. Normal rotation engines turn clockwise when you look at the engine from the front. Alex.

2009年1月10日 · Turn pitman shaft adjuster screw counterclockwise until screw is fully extended, then turn screw back 1/2 turn clockwise. (This is referring to the allen-headed deal inside the …

2011年12月26日 · You are flipping the input rotation so if the transfer case is in the middle as normal, both outputs need to rotate in the opposite direction they normally do. There may be …

2003年10月30日 · Found some Hi Pinion gears & also some Reverse rotation gears. What happens if I run either one. Do I get a stronger forward mesh (drive side) or weaker (coast …

2013年8月3日 · Long pump. There are short style pumps but they were used on very early big blocks, early as in the 60's. Since the 70's all v8 pumps have been long and your vortec motor …

2003年6月6日 · on a RWD vehicle the proper rotation is to cross the fronts to the back (putting the front tires on the opposite side at the rear) and move the rears to the front keeping them on the …

2010年10月18日 · A reverse rotation engine, in theory, will work, but, most transmissions aren't going to be the happiest with it. If weight and size of the transfer case isn't too huge a concern, …

2022年7月20日 · I have a street/sand toy (mostly street) with a 525 box up front that was supposed to be reverse rotation. ie You turn the steering wheel left and pitman goes right. Well …